Products

DESCRIPTION

Basic Info

Model NO.	SYD-0615
HS Code	90158790
Production Capacity	500sets/Month

Product Description

TBT-0615 Asphalt Paraffin (Wax) Content Tester
Summary
This instrument is designed and made as per standards T 0615-2011 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering and SH/T0425 Standard Test Method for Wax Content Test of Bitumen. It is used to determine the wax content in the petroleum asphalts by cracking distillation.

I. Main technical features

• This instrument adopts method of distillation cooling to determine the wax content of sample. The instrument has two parts: Upper part contains stirring motor, temperature sensor, air flow distributor and hook for sample vessel. Lower part is the cooling filter
• The special designed air flow distributor and hook for sample vessel make the instrument more reasonable and convenient for use.
• The constant temperature bath adopts glass material. It has good heat preservation. There is no mist on the observation window. Convenient to observe.
• This instrument equips a high accuracy digital temperature controller with clear temperature show and simple temperature set.
• This instrument is floor-type structure. It can determine 3 samples at the same time. The test efficiency is high.

II. Main technical specifications
1. Power supply: AC(220±10%)V,50Hz.
2. Heating power: 700W.
3. Cooling power: 1000W.
4. Stirring rate of motor: 1200 r/min.
5. Temperature sensor: Pt100.
6. Refrigeration medium: F22.
7. Temperature accuracy: ±0.1ºC.
8. Working environment: -30ºC~40ºC,RH<85.
9. Total power consumption: ≤1800W.
10.Overall dimension: 620mm×500mm×1600mm
(The air flow distributor is included)
III. Standard accessories

No.	Item	Unit	Qty
1	Cooling and filtering device (including suction flask, sand core filter funnel, sample cooling tube, glass tube, glass rod, etc.)	Set	3
2	Pyrolysis flask (With a handle)	Piece	3
3	Sample tube (90 ml)	Piece	3
4	Mercury thermometer (-30 ºC~+50 ºC, scale division is 0.5ºC)	Piece	1
5	Dustproof cover (3 large and 3 small)	Piece	Total 6
6	Conical flask (250×24)	Piece	5
7	Stopper for thermometer (Large)	Piece	1
8	Silica gel tube (outer diameter Ф9×wall thickness1.5; length 400 mm)	Piece	3
9	Silica gel stopper (5#: 2 pieces, 6#( Improved.): 2 pieces)	Piece	Total 4
10	Beaker (1000 ml)	piece	1
11	Graduated flask (100 ml)	Piece	1
12	Stopping ring for thermometer (1#)	Piece	4
13	"O" type rubber ring (Ф31×2.4)	Piece	3
14	Fuse 15 A (Ф6×30)	Piece	3
15	Power supply wire(Homemade)	Piece	1
16	Pneumatic distributor(Including installation frame, must install it by user self)	Set	1
17	Sample container hook holder	Piece	1
18	Wax filter bottle(250 mL)	Piece	3
19	Three way component(One into two out, with two-way valves)	Piece	1
20	Transition joints(Φ12.7 turn Φ10)	Piece	1
21	Rubber tube (outer diameter Ф14×wall thickness3.5)( According to the user's need to cut the tube)	Meter	8
22	Silica gel tube (outer diameter Ф18×wall thickness3.0) ( Connecting transition joints and vacuum drying box)	Centimeter	8

IV. Optional accessories
1.Vacuum pump: Model 2XZ-2L/S(Recommend)
2.Vacuum drying oven:Model DZF-6020(Recommend)
3. Burning furnace: Model TBT-0615-1 Cracking furnace(Recomend)
4. Balance: 0.1mg ,0.1g one set for each


2XZ-2L/S Vacuum Pump specification

Bleed (L/S)	2
Max Pressure(Pa)	≤6×10-2
Speed(r/min)	1400
Capacity(kw)	0.37
Power supply (V/Hz)	220V/50Hz
Inlet caliber(mm)(mm)(outside diameter)	Φ30
Noise(dBA)	68
Oil Capacity (L)	1.0
Dimension(mm)	514×168×282
Weight(Kg)	27

TBT-0615-1 Cracking furnace
Summary
The instrument is designed and made as per the regulation of cracking distillation stove in the petrochemical industrial standard of People's Republic of China SH/T 0425-2003 "Test Method for Wax content of the Asphalt " and T0615-2011 "Asphalt Wax Content Test (Distillation Method)" in the industrial standard of People's Republic of China JTG E20-2011 "Standard Test Methods of Bitumen and Bituminous Mixture for Highway Engineering " .It is the specified equipment and matched with the "SYD-0615 Asphalt Wax Content Tester",It also satisfies the needs of petroleum products .

I. Main technical features

• This instrument adopts the mode of electric heating ,and the constant temperature can be controlled the range of 550ºC+10ºC.The heating power can be adjusted continuously and it can satisfy the needs of the distillation of samples .
• The instrument adopts heating furnace and elevator-platform. Two parts are independently and in use two is made one ,it is convenient to use .
• The housing washer of heating furnace adopts humanized design of heat insulation and reduce the effect of the heat radiation to the operator .
• The temperature controller adopts LCD display, single chip control technology. Advanced technology and small overshoot .It can reach to 550ºC+10ºCconstant temperature ,which only needs 15 minutes at normal atmospheric temperature.

II. Main technical specifications
1. Power supply: AC(220±10%)V, 50 Hz
2. The electric furnace heating power:2000W
3. Heating control:solid adjustable pressure model can be adjusted continuously.
4. Constant temperature control: 550ºC+10ºC
5.Ambient temperature:≤35ºC
6.Relative humidity:≤85%
7.Total power consumption:≤2100W
8.Dimension:heating furnace:220mm*330mm*400mm
elevator-platform:150mm*1750mm*120mm
9.Weight:5kg



MP Electronic Balance
I. Feature:
1. LCD display
2. Zero in range ability
3. Auto zero-tracking
4. Auto-calibration
5. Automatic trouble diagnosis
6. Built-in under hook (optional)
7. Over-loading protection
8. RS232 communication (optional)
9. Weighing/piece counting/percentage weighing
10. Pan Size:174×143
II. Specification:

Product Model	MP31001
Weighing Capacity(g)	3100
Readability (g)	0.1
Repeatability (≤g)	±0.1
Linearity (≤g)	±0.2
Gross Eight ( kg)	2.8
Net Weight (kg)	1.9
Dimension (mm)	190×250×75

FA Electronic Balance

Product Model	FA2104
Weighing Capacity(g)	210
Readability (mg)	0.1
Repeatability (≤mg)	±0.1
Linearity (≤mg)	±0.2
Pan Size (mm)	90

DZF-6020 Drying Oven

Model	DZF6020(Advanced)
Product Type	Desktop electric drying Oven
Voltage	220 V 50 Hz
Power	450 W
Chamber Material	SUS304, Mirror Surface
Temperature Range	Ambient + 5°C to 200°C
Temperature Control Accuracy	+/- 0.1°C
No. of shelves	1 (can add to 2 as clients require)
End Vacuum Level	<133 Pa (1 mmHg)
Chamber Size W x D x H (mm)	300mm x 300mm x 275mm
Overall Size W x D x H (mm)	605mm x 490mm x 450mm